Welcome to the TechPlate, Inc. - Vacuum Cadmium [MIL-C-8837B] page
bar_t.gif (803 bytes)
Tooling Finishes FirearmsPrices Glossary Dura-Plate
MinimunPrices Order Contact Links Home
bar_b.gif (803 bytes)



Vacuum Cadmium


Used primarily to provide corrosion resistance to ferrous parts to be free from hydrogen contamination and possible embrittlement. Recommended on steels 220,000 psi or above. Coating is applied after all machining, brazing, welding and forming has been completed. 
Prior to coating, all steel parts shall be stress relieved by baking at 375° ± 25°F for 3 hours if suspected of having residual tensile stresses. Immediately prior to coating, lightly dry abrasive blast areas to be coated. 
Cadmium coating shall not be used, if in service, temperature reaches 450°F.


bar_b.gif (803 bytes)
Tooling Finishes Firearms Glossary Dura-Plate
MinimunPrices Order Forms Contact Links Home

1571-H S. Sunkist St. Anaheim, CA 92806 
Tel: 714.634.9254 - Fax: 714.634.9382
E-mail: plating@techplate.com
Revised: 11-04-2002
©1999-2002 TechPlate, Inc. All rights reserved.